Description
The CF-1010 tonearm uses pre-loaded single-point bearings throughout, offering zero jitter (unlike designs that use micro ball races) and virtually no friction. High-quality fine internal wiring runs from the arm to the pillar, presenting minimal resistance and ensuring consistent anti-skate bias via the hanging weight across the entire record surface.
The package includes all hardware required for accurate tonearm setup, a high-quality 2.0-metre RCA tonearm cable, a digital cartridge tracking-force scale, and a fine-fibre vinyl cleaning brush.
Optional accessories include a choice of alternative counterweights and headshell weight sets.
The standard counterweight supplied is suitable for most cartridges. However, customers can receive guidance on achieving their preferred or optimum cartridge resonance frequency, along with advice on how best to achieve it.
CF-1010 9” tone-arm £3,495.00p
complete with:
User Manual
2.0Mtr. cable, 5pin DIN – 2 x RCA
Digital stylus force guage
Carbon Fibre brush
+ Free calculation of tone-arm / cartridge frequency; advice on optimising for 7.0Hz or your preferred frequency ‘setting’ (Ortofon now suggest 6.5Hz). We recommend no lower than 7.0Hz to ensure no miss-tracking on ‘lightly’ warped records. Calculation Service only available through your Dealer, with or after purchase of CF-1010.
Accessories
Tone-arm cable, as supplied with CF-1010 £ 46.00p
UNITY high performance tone-arm cable UP.OCC £680.00p
(single crystal) copper wire, Cryogenically
treated and ‘burnt-in’.1.5Mtr. 5 pin DIN (solid silver contacts)
straight or elbow type,
2 x high quality pure copper RCA connectors.
Earth wire fitted with ‘wirewound’ RF / noise filter.
Digital stylus force gauge as supplied with CF-1010 £ 23.99p
(0.1gm accuracy, up to 5.0 gm.)
Carbon fibre brush, as supplied with CF-1010 £ 9.60p
Headshell weights (universal headshell fitting).
Each: (weights are shown to nearest half gram)
1.0mm th. (5.0gm) £ 12.00p
1.5mm th. (7.0gm) £ 16.00p
2.0mm th. (8.5gm) £ 20.00p
3.0mm th. (14.5gm) £ 24.00p
4.0mm th. (19.0gm) £ 28.00p
Set of 5 weights, as above (1.0mm , 1.5mm , 2.0mm , 3.0mm , 4.0mm) £ 98.00p
c/w M2.5mm stainless steel screws set (as described below)
M2.5 Screws set, Stainless steel screw set, 6,8,10,12 & 20mm £ 16.80
+ washers, bolts and Alan key, in box.
CF-1010 Tone-arm counterweights
6 different tone-arm counterweights available. £ P.O.A.
Subscribe to our newsletter
