A.R.T Loudspeakers Dram Monitor

£9,750.00

For those with smaller listening spaces who don’t want to sacrifice perfor

Interested? Contact Us

Description

The ‘MONITOR’ is an itch Art have been wanting to scratch for some time now.
Art have been developing a new multi-layered cabinet construction which results in an extremely inert and stiff enclosure.

For this speaker we created an upward firing Bass reflex port allowing huge flexibility in the placement of the speaker.

Technical data

Speaker Type:
2 way Bass Reflex Monitor loudspeaker
Drivers:
1 x 220 mm Mid -Bass (Treated paper 30mm voice coil) 1 x Tweeter 35mm Fabric Dome with alnico magnet
Crossover:
Jensen Copper foil Inductors and Capacitors
Internal Wiring:
Dram Copper Reference
Binding Posts:
Silver Plated terminals
Frequency Response:
32Hz – 5o kHz ±3dB
Sensitivity:
90 dB/for 1 watt@1metre
Impedance:
8ohm nominal impedance
Recommended power:
Min 8 watts
Cabinet:
Multi-layer cold moulded cabinet
Finishes:
Piano Gloss and Polyester Finishes
Overall dimensions:
550mmH x 320mmD x 305mmW  (Cabinet)
Weight packed:
30 kilos each

Available with either DRAM copper or DRAM silver wire, these speakers can be purchased and later upgraded to a higher spec model. The cabinets are finished with high gloss polyester Lacquer in any RAL colour and can also have any automotive finish applied with the deep gloss.

The Exotic T35 is a classic dome midrange tweeter with high sensitivity and a smooth, extended frequency response.

A coated fabric dome with integral surround manufactured by Dr. K. Müller in Germany  ensures excellent performance and consistency. This supplier was among the first in the world to offer fabric dome diaphragms, and did produce the diaphragm for the famous 1.5” Dome Tweeter H087, developed by Seas in 1968.

A high efficiency Alnico V ring magnet in a carefully designed system contributes to high sensitivity and low distortion. A large and well damped cavity in the pole ensures a low resonance frequency and smooth response.

A generously underhung 35mm voice coil wound from copper-clad aluminum wire further enhances the sensitivity. Flexible lead-out wires and venting holes in the aluminum coil former help reduce noise to a minimum.

A large diameter 7mm thick precision machined aluminum front plate with moderate horn loading ensures linear frequency response and represents an extremely stable platform for the magnet system and the moving parts.

Follow us on

Contact us about the

Close

Thank you

Thank you for contacting The Hi-Fi Gallery. We will respond to your enquiry as soon as possible.

Close