We are now fully open, but due to Covid 19, we are taking the precaution of asking for demos by appointment only, to arrange your appointment please call us 01592 859163 or email

We are maintaining social distance and the premises and equipment is cleaned regularly and between appointments.

EAT C-Sharp with Jo No5 Cartridge [SOLD]

EAT C- Sharp Turntable, tonearm and Jo No5 Cartridge Pre Owned.

Interested? Contact Us

Description

EAT C- Sharp Turntable and Jo No5 Cartridge. (around 200 hours on the cartridge)

Pre Owned, 18 months old, fabulous condition. 1 owner. full accessories kit included, no original box, but will be re-boxed professionally.

These are around £4000 new, this combo is barely run in and yours for £2100

 

Here is what EAT say about their C-Sharp

Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity.

The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge.

The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point. So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie.

The belt is made from special anti-static rubber. It’s glued and then polished.

The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%

The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges.

An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching.

And the Cartridge

High End E.A.T. cartridge. It comes in unmistakeable mint green colour and features a truthful and immersive sound that is pure E.A.T.
E.A.T. is very proud to announce its second cartridge creation in history, after the highly acclaimed and successful Yosegi MC. Jo No.5 is an elegant masterpiece, both sonically as well as visually.

Cartridge body and stylus guard are produced by an additive manufacturing process which is called Selective Laser Sintering (SLS). This process sinters thin layers of powder with a laser to build the final structure.

Moving Coil Cartridge

Moving Coil turntable pickup
Nude Fine Line stylus type!
Body and stylus guard made of Polyamide
Selective Laser Sintering manufacturing process
Elegant looks
Unmistakeable E.A.T. mint colour!

E.A.T. JO N°5 CARTRIDGE TECHNICAL INFORMATION

STYLUS TYPE
Nude Fine Line
CARTRIDGE WEIGHT
15 g
STYLUS TIP RADIUS
8/40 μm
FREQUENCY RESPONSE
20 – 26.000 Hz ±1.5dB
OUTPUT VOLTAGE AT 1000 HZ
5cm/sec. 0.33 mV
CHANNEL SEPARATION AT 1 KHZ
> 25dB
CHANNEL SEPARATION AT 15 KHZ
> 16dB
CHANNEL BALANCE AT 1KHZ
> 1.2 dB
COMPLIANCE, DYNAMIC/LATERAL
12 μm/mN
TRACKING FORCE RANGE
2.2-2.5 g (22-25 mN)
TRACKING FORCE RECOMMENDED
2.4 g (24 mN)
TRACKING ABILITY AT 315 HZ AT RECOMMENDED TRACKING FORCE
80 μm
TRACKING ANGLE
20°
COIL WIRE MATERIAL
Pure 4N copper
RECOMMENDED LOAD IMPEDANCE
> 20Ω
INTERNAL IMPEDANCE, DC RESISTANCE

Subscribe to our newsletter

Contact us about the

Close

Thank you

Thank you for contacting The Hi-Fi Gallery. We will respond to your enquiry as soon as possible.

Close