Description
The EPS G2 produces clearly audible improvement in terms of stability, calmness, spatiality and tonal pureness. Music is reproduced with greater naturalness, clearer expression and in a brighter quality. Its straight design visually fits in every configuration.
Why does an external power supply represent such an improvement? The properties of active circuits are highly dependent on their supply voltages. Devices designed for the reproduction of music are very sensitive to any kind of external supply variations. As a voltage source, the EPS G2 offers extremely precise and load-independent supply voltages. With these properties, EPS G2 comes close to an ideal voltage source without accepting the disadvantages of accumulators.
The EPS G2 achieves effective decoupling of all harmful influences from the public power supply system. The EPS G2 is fed by a constant, low-noise source usually used in laboratory environments. This precise constant voltage supply will really make the decisive difference to the performance of your devices.
Absolute Control
The EPS G2 is built up as a high-precision constant voltage source. The chassis and circuit design are magnetically and capacitatively optimized. The circuit board layout minimizes loss from oversized current paths and earths the current flow.
The arrangement of the toroid core transformers minimizes the influence of magnetic disturbances. The voltage supply is managed by two 100 VA ring toroid transformers that are each responsible for one half-wave. The capacity of the fast and impulse-stable high current capacitors is 260,000 uF. Only Schottky-diodes with extremely fast switching times are used. A highly constant and low-noise laboratory source serves as voltage reference.
Low Noise?
In an additional stage high-precision operational amplifiers smooth the reference voltage once again and eliminate the remaining noise. The voltage regulators are built up as discrete and very fast MOSFET regulators. Their output voltage is constant and load-independent up to highest frequencies.
The EPS G2 therefore is the ideal power supply for connected Audionet devices.
The EPS G2 is an external precision power supply & conditioner for the following Audionet electronic gear with a 5- or 7-pole socket:
ART G3
PRE I G3
PAM G2
DNC
For the choice of the needed connection cable, the main power connection of the mother unit as well as a full
Special Features
2 * 100 VA toroid core transformers
260.000 μF smoothing capacity
Separate 10 VA transformer for digital voltages
Output:
7-pole socket for Audionet gear
Mains:
IEC male power insert connector
Subscribe to our newsletter
