we now offer full tonearm repairs following extensive training by Audio Origami, Linn Ittoks are our speciality.

if you wish to discuss your repair, or any other questions please call us on 01592 859163 or email

Ayon Audio Stealth

£6,995.00

Ayon Audio is pleased to introduce the distinguished audiophile “Stealth” DAC.
The Stealth is also prepared for computer playback and general DSD professional audio use.

Interested? Contact Us

Description

The dual differential gain stage is composed of 2 high performance tubes per channel. The Stealth DAC features a vastly overrated, high capacity power supply for the analog output stage with tube “bridge” rectification, choke coupling and two oversized power transformers. The sound is powerful with fantastic bass speed, extraordinary dynamic, airy, detailed and holographic. A new vacuum tube based DAC star was born and offers an outstanding price/performance and value.

Manufactured in Austria, based on the Ayon Stratos DAC platform, the Stratos, big brother to the Stealth. The Stealth is a reference quality DAC, Pre-amplifier, 100% in the analog domain. Pro recording studios use the Stealth to process their audio–that’s how nice it is!

 

Technical Data

Conversion rate
768kHz/32 bit, PCM up to 192k, 64xDSD, 128xDSD
DAC configuration
8 mono DACs to 2- stereo outs
Tube complement
Analogue output 6H30
Dynamic range
> 128dB
Output level
@1 kHz / Rms 0-12V
Output impedance 
Single-Ended-RCA ~ 300 Ohms
Output impedance 
Balanced-XLR ~ 300 Ohms
Digital input
1 x S/PDIF, 1 x AES/EBU, 1 x Toslink, 1 x BNC, 1 x USB, 1 x I2S, 3 x BNC for DSD
Analog line
input/output RCA
Analog output
RCA & Balanced XLR
S/N ratio
> 120 dB
Frequency response  
20Hz – 50kHz  +/- 0.2dB
Total harmonic distortion
@ 1kHz < 0.001%
Remote control
Yes
Dimension (WxDxH) cm 18.89 x 15.74 x 4.33 inches
48 x 42 x 11 cm
Weight
20kg

Full-featured Tube D/A converter
Class-A triode vacuum-tube output stage for single-ended & balanced operation

Signal Path
We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths.

*Logical sequenced soft-start power up for extended tube life
*Warm up function
*0dB negative feedback (of any kind )
*Ultra short signal path
*Simplest direct circuit path for purest musical sound and high reliability
*Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid state power amp
*No solid state devices in the analog tube output (signal path )
*Minimal discrete wiring for optimum signal propagation
*No followers or buffers in the signal path
*High quality parts throughout
*Fully hand assembled to insure the highest level of craftsmanship
*Separate analog output stage for left and right channel
*Analog inputs
*All digital inputs
*Internal hardware PCM upsampler for CD sources to 24/192K (can be disabled)
*Native 192kHz PCM and DSDx128 conversion
*Ultra-low jitter internal clock generator
*USB input (24/192 asynchronous and DSD)

Power Supply
The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage. This makes it a pure power source, which is a critical attribute for a 6H30 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors.

*2 separate R-Core / Low noise – insulated power transformer for digital & analog
*Tube rectification
*Choke – filtered power supply and coupled with special film caps
*Innovative power supply provides a high speed energy delivery on transient separate and isolated power supplies over each stage of amplification
*Regulated DC filament supplies with soft start for tube
*AC power line filter to avoid noise and hash from entering into the unit.
*10 separate voltage regulators

Components
The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship, of which type of part to use where, that sets our products apart from the masses.

*Selected, premium quality passive components used in all applications
*High speed & high quality audiophile grade coupling capacitors
*High quality tube sockets with gold pins
*Superior capacitors ( MKP 1% )
*High quality – RCA & XLR jack
*Gold-plated industrial grade PCB

Mechanical Construction
The high grade aluminum chassis imparts a richer, more lustrous tonality with a cleaner back-ground and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s are fully hand assembled to insure the highest level of craftsmanship.

*Front panel descriptions are engraved
*AC phase polarity control indicator
*The aluminium feet are resonance absorbing types
*Chassis finish: black / chrome

Subscribe to our newsletter

This error message is only visible to WordPress admins

Error: No feed found.

Please go to the Instagram Feed settings page to create a feed.

Contact us about the

Close

Thank you

Thank you for contacting The Hi-Fi Gallery. We will respond to your enquiry as soon as possible.

Close